Whether you need to supply adhesive to your high speed automated dispense line or to supply adhesive resin and hardener components to cartridge filling lines, reliable drum pumps are of key importance.

 

Large range of pump and air motor combinations, i.e. ratios from 1:1 up to 100:1, flow rates of up to 124 LPM.

Chop Check, 2-Ball and 4-Ball Pumps depending on material properties, i.e. viscosity and rheology.

Material options for pump lowers to ensure chemical compatibility, including ceramic hard coating for abrasive materials, different stainless grades for chemical compatibility. Best material match specs. for Epoxy, Urethane, Acrylic, Methacrylate, Silicone and Polysulfide.

Different follower plate configurations with full PTFE Coated variants available, for both 20L and 200L drum sizes, custom options available.

Single and twin-post lift options.

ATEX Variants available

 

CLICK HERE TO ENQUIRE

Our Solutions

1-Component Cartridge Filling

The range includes systems to fill cartridges in a vertical orientation, and a horizontally orientation, along with a range of Presses (for Drums or Mixing Vessels) to feed the Filling Systems

Find out more

2-Component Cartridge Filling

The range includes Semi-automatic Filling and Piston Insertion Systems, and Automatic Filling Systems. Along with a range of Presses (for Drums or Mixing Vessels) to feed the Filling Systems.

Find out more

Hydraulic Discharge Presses

The range includes Hydraulic Discharge Presses for 200 litre (55 Gallon) Drums, and Customised/Bespoke Hydraulic Discharge Presses for Mixing Vessels

Find out more

Foilpack / Chub Filling

The range includes Automatic Foilpack/Chub Filling (Form, Fill and Seal) systems in horizontal configurations, along with a range of Presses (for Drums or Mixing Vessels) to feed the Filling Systems

Find out more

Pot & Tin Filling

The range includes Semi-automatic Filling Systems, and Automatic Filling Systems (with option for further downstream processes). Along with a range of Presses (for Drums or Mixing Vessels) to feed the Filling Systems.

Find out more

Pail & Drum Filling

The range includes systems that fill by weight (for lower viscosity products) and systems that fill by volume (for high viscosity products), along with a range of Presses to feed the Filling Systems

Find out more

Bottle Filling & Capping

The range includes Automatic Bottle Filling (with options for filling by weight or filling by volume), Bottle Capping (for regular caps or more complex closures), and option for further downstream processes

Find out more

Tube Filling & Sealing

The range includes Tube Filling System for Plastic, Laminate and Aluminium Tubes, with automatic infeed of empty tubes, orientation, filling, and sealing, along with options for further downstream processes.

Find out more

Dispensing Systems

Dispensing Systems for a wide range of applications – Moulding & Casting, Panel Lamination, Gluing & Bonding, Sealing & Gasket, Potting & Encapsulation, and Fluid Transfer.

Find out more

Blog

entrapped air in a liquid

Key Factors That Influence Filling Quality

Posted

Key Factors That Influence Filling Quality: Understanding the Challenges and Solutions

When it comes to achieving accurate and repeatable dosing, the equipment used in the filling process plays a central role. However, there are many other factors to consider that can influence fill quality. One of the most important considerations is related to viscosity, which significantly impacts the flow of materials, especially when it comes to air entrapment and compressibility.

Read more

200ltr Drum Press

Cost of ownership

Posted

A suitable equipment specification can save many hours of set-up, cleaning and servicing time and cost.

 

Especially where different materials are being processed through the same equipment or stringent quality systems require a clear separation between each batch.

Read more

Hydraulic Discharge Extrusion Press

What is the best machine for filling different types of (paste) adhesives?

Posted

What is the best machine for filling different types of (paste) adhesives?

 

When filling different formulations of paste (mid to higher viscosity) adhesives on the same filling machine, you will want a machine that is quick and easy to clean and set up.

Read more

5 Reasons to Automate Cartridge Filling

Posted

Cartridge Filling is a critical process in the manufacturing and packaging of adhesives, and automating it can bring significant benefits to your business. Here are five reasons why you should consider automating your Cartridge Filling process:

Read more

VIEW ALL BLOG POSTS